795 775 895 DC Motor Single Shaft 12V 24V Ball Bearing High Speed Power Electric 12 V Volt Moter Engine Drill Cut Tools

SPECIFICATIONS

795 775 895 DC Motor Single Shaft 12V 24V Ball Bearing High Speed Power Electric 12 V Volt Moter Engine Drill Cut Tools

Brand Name: HYSMOTOR

Certification: CCC

Origin: Mainland China

Commutation: Brush

Type: Micro Motor

Protect Feature: Explosion-proof

Construction: Permanent Magnet

Usage: BoAt

Usage: car

Usage: Electric Bicycle

Usage: Fan

Usage: Home Appliance

The measuring instruments we use are different, so the data for measuring the size of the motor will be slightly different. If your device has restrictions on the installation of the motor, you need to check it before buying.

Low speed version 12v-24v ; 4000-8000rpm

1. Rated voltage : DC 12V To 24V

2. No load speed : 12v is 4000rpm Troque  4.4kg.cm , 24v is 8000rpm Troque 6.7kg.cm

3. Maximum torque :  6.7 KG.CM(It is best not to reach this value when the motor is working.）

4. No load current : 2.05A

5. Support for forward and reverse rotation

6. The diameter of the motor shaft is 4MM

7. Material: The front and rear axles are ball bearings; the motor casing is galvanized and rust-proof; the carbon brush is thickened, the service life of the motor can be extended; the inner rotor uses pure copper coils, the electrical conductivity of the motor is stronger

8. This motor is suitable for a variety of micro-automation equipment. As long as you confirm that the motor voltage and torque of your choice are suitable for the voltage and load of your project before purchase, there is no limit to the scope of use of this motor.

For example, Coffee machine ; blender ; child scooter ; micro cutter, etc.

High speed version12v-24v ; 10000rpm-20000rpm

1. Rated voltage : DC 12V To 24V

2. No load speed : 12v is10000rpmTroque  4kg.cm;  24v is 20000rpm  Troque  6kg.cm

3. Maximum torque :  6KG.CM(It is best not to reach this value when the motor is working.）

4. No load current : 2.05A

5. Support for forward and reverse rotation

6. The diameter of the motor shaft is 4MM

7. Material: The front and rear axles are ball bearings; the motor casing is galvanized and rust-proof; the carbon brush is thickened, the service life of the motor can be extended; the inner rotor uses pure copper coils, the electrical conductivity of the motor is stronger

8. This motor is suitable for a variety of micro-automation equipment. As long as you confirm that the motor voltage and torque of your choice are suitable for the voltage and load of your project before purchase, there is no limit to the scope of use of this motor.

For example, Coffee machine ; blender ; child scooter ; micro cutter, etc.

The following are the dimensions of the 795 motor

The measuring instruments we use are different, so the data for measuring the size of the motor will be slightly different. If your device has restrictions on the installation of the motor, you need to check it before buying.

The following are the dimensions of the 795motor